Ardex A35 Mix has all the rapid setting and ultra rapid drying benefits of Ardex A35, bit it is pre-blended with the correct mix of cement and sand for convenience, i.e. in locations where access is limited. Ardex A35 Mix can also be used for repairing screeds.
Key Features
- Cement and sand included – just add water.
- For new screeds or repairs to existing screeds.
- Walk on after 3 hours.
- Receives floor coverings, including ceramic tiles, after 24 hours regardless of the thickness.
- Receives resilient and textile flor coverings after 4 hours when smoothed with Ardex A55.
- Conforms to EN13813 CT-C35-F6.
- Test with BRE screed tester after 6 hours.
- Can be used with underfloor heating.
Technical Information
Application thickness bonded screed: 15-50mm.
Application thickness unbonded screed: 40mm+.
Application thickness floating screed: 65/75mm+ (65mm for domestic locations only).
Working time: 1 hour at 20°C.
Walkable: 3 hours at 20°C.
Fix ceramics – bonded screed: 24 hours at 20°C.
Fix ceramics – unbonded screed: 24 hours at 20°C.
28 day compressive strength: 40 N/mm².
External use: No.
Under DPM: No.
Suitable for underfloor heating: Yes.
Storage: 12 months from the date shown on the packaging.
Material requirement: 1.85kg of powder/m²/mm.
Size
25kg
Coverage
Depending on flatness of surface approximately 0.5m² at 25mm thick per 25kg bag (roughly 1.85kg/mm/sqm).
Please use our levelling compound calculator by clicking here.
The post Ardex A35 Mix – Pre-Blended Rapid Drying Screed appeared first on Tile Couture.