Mapei Ultraplan Renovation Screed
Fibre reinforced self-levelling compound designed for the renovation/refurbishment of existing floor substrates. For use in both commercial and domestic situations. Can be used from 3-30mm on concrete,...
View ArticleMapei Topcem Pronto – Ready To Use Controlled Shrinkage Mortar
Features Colour : Grey. Interior & Exterior Use. Consistency : Powder. Mixing time : 5-10 mins. Mix Ratio : 1.7 L of water per 25kg of Topcern Pronto. Workability of the mix : 60 mins. Set to light...
View ArticleArdex A45 – Rapid Drying and Hardening Internal Repair Mortar
Ardex A45 (Ardurapid) is ideal for the rapid repair of internal concrete, screed, renders and concrete steps. Receives finishes after 90 minutes regardless of thickness. Slump free – ideal for vertical...
View ArticleArdex Coarse Aggregate
Ardex Coarse Aggregate is a dry, pre-packd 3mm graded aggregate for use with ARDEX Sub-Floor Smoothing Compounds where thicker applications are required Size 25kg. Safety Sheet The post Ardex Coarse...
View ArticleMapei Mapetex System – Anti-Fracture Membrane (1sqm)
Features Colour : White Storage : No expiry date Width : 1 and 2m Material : Synthetic non-woven fabric. Helps prevent cracks appearing in the tiled finish when used over imperfect substrates....
View ArticleMapei Topcem
Ready to use, pre-packed mortar for normal setting, fast drying screeds with controlled shrinkage. The post Mapei Topcem appeared first on Tile Couture.
View ArticleBal Quickset Render – Preparation Render For Walls
Features Colour : Grey Pre Blended. Rapid Setting. Can be applied to dry/wet interior and exterior walls. Setting time – 2 hours. Size 25kg. [button...
View ArticleArdex K15 – Rapid Drying Sub-Floor Levelling and Smoothing Compound
Application thickness (total): 3-35mm. Application thickness (neat): 3-10mm. Application thickness (with aggregate): 10-35mm use from half to equal volumes of Ardex Aggregate to the Ardex K15 mix....
View ArticleArdex A35 Mix – Pre-Blended Rapid Drying Screed
Ardex A35 Mix has all the rapid setting and ultra rapid drying benefits of Ardex A35, bit it is pre-blended with the correct mix of cement and sand for convenience, i.e. in locations where access is...
View ArticleBal Level Max – High Performance, All In One Leveller
The maximum performance, all-in-one floor leveller with Fibre Strand Technology (FST) USE FOR Preparing floors for tiling Most substrates Dry/wet – interior Suitable for timber floors at 3mm Levelling...
View Article